MMCD Construction Standards

The City of Kamloops uses the MMCD Platinum (2009) Edition. All construction works shall conform to:

  • The MMCD Platinum (2009) Edition,
  • All City of Kamloops Amendments,
  • The City of Kamloops Approved Products List, and
  • The following list of Standard Detail Drawings

This information is supplementary to Volume II of the Master Municipal Construction Documents published by the M.M.C.D.A., 2009. All civil construction projects for municipal ownership are to comply with the following supplemental construction criteria:

Amendments to MMCD - 2013
List of Approved Products and MaterialsNovember 2021
MMCD Amendments*March 15, 2013
MMCD Amendments*March 17, 2014
Supplemental Standard Detail DrawingsJune 2019**
Standard Survey RequirementsMarch 2014
Water/Sewer/Drainage Electrical SpecificationsNovember 2014
Water Main Testing ProcedureMarch 2011

*Supplementary General Conditions and Supplementary Specifications 
** Last update to one or more drawings

For Unit Price Contract - Consultant (amended March 2016), please contact Jessie Horton at 250-828-3584 or Darren Crundwell at 250-828-3535.

Supplemental Standard Detail Drawings
Concrete and Miscellaneous Details
C0 Drawing Index - Concrete and Miscellaneous DetailsMMCD 
SC14Monolithic Curb, Gutter & SidewalkReplaces C1-C3Feb 2019
C4 Concrete Curbs - Narrow BaseMMCD 
C5 Concrete Barrier Curb - Wide BaseMMCD 
C6 Concrete Median and Interim CurbsMMCD 
SC76Driveway Crossing at Sidewalks and CurbsCoK SupplementalFeb 2019
SC8/SC93Wheelchair RampCoK SupplementalFeb 2019
SC104Multi-use PathwaysCoK SupplementalJan 2019
SC113Bicycle BaffleCoK SupplementalJan 2019
C12 Removable Restriction PostMMCD 
C13 Chain Link Fence for WalkwayMMCD 
SC142Handrail on Concrete Retaining WallCoK SupplementalFeb 2019
SC152Wooden Fence for Multi-use PathwaysAdditionalFeb 2019
SC162Tree Planting DetailAdditionalFeb 2019
SC172Access GateAdditionalJan 2019
SC182No Public Access SignageAdditionalJan 2019
Concrete Base
CE1.1 Concrete Base IndexMMCD 
CE1.2 Type A and B Sonotube Concrete BasesDelete 
CE1.3-1.4 Type C,C1,C2,C3 Trapezoidal Shape Concrete BasesMMCD Supplementary Update 
CE1.5 Type C4 & C5 Spread Footing Shape Concrete BasesMMCD Supplementary Update 
CE1.6 Type C4 & C5 Spread Footing Concrete BasesMMCD 
CE1.7 Type C4 & C5 Spread Footing Concrete BasesMMCD Supplementary Update 
CE1.8-1.9 Type E2 Trapezoidal Shape Concrete BaseMMCD 
CE1.10-1.12 Types F1,L1,S1 Spread Footing Shape Concrete BasesMMCD 
CE1.13-1.14 Types F2,L2,S2 Trapezoidal Shape Concrete BaseMMCD 
CE1.15 25mm Anchor BoltsMMCD 
CE1.16 Anchor Bolt Cage for Types 6, 7 & S PolesMMCD 
CE1.17 Anchor Bolt Cage for Type L PolesMMCD 
CE1.18 Concrete Base for Post Mounted Flasher Luminaire (Precast)Delete 
CE1.19-1.20 Pole Base Installation DetailsMMCD 
E0.1-0.2 Drawing Index - Electrical DrawingsMMCD 
SE1.1 Type M (Nema Cabinet) Concrete Controller BaseDelete 
SE1.21Type P (Nema Cabinet) Concrete Controller BaseCoK SupplementalApr 2015
E1.3 Model 170 Concrete Controller BaseDelete 
SE1.41Controller Installation (Type P & M CabinetsCoK SupplementalApr 2015
E1.5 Controller Installation (Model 170 Cabinets)Delete 
E1.6-1.7 Type F Control PedestalDelete 
E2.1 Round Plastic Junction BoxesDelete 
E2.2 Type 37 & 66 Concrete Junction BoxesMMCD 
E2.3-2.4 Large Concrete Junction BoxesMMCD 
E2.5-2.6 Concrete VaultMMCD 
E3.1 Underground Conduit in Paved AreasMMCD 
E3.21Underground Conduit in Non-Paved AreasMMCD 
SE4.11Luminaire Pole (Type 2 Shaft)CoK SupplementalJan 2011
E4.2 Luminaire Pole (Type 2 Shaft)MMCD 
E4.3-4.4 Signal Pole (Type 1 Shaft)MMCD 
E4.5-4.6 Signal Pole (Type 3 Shaft)MMCD 
E4.7-4.8 Signal Pole (Type 6 Shaft)MMCD 
E4.9-4.10 Signal Pole (Type 7 Shaft)MMCD 
E4.11-4.13 Signal Pole (Type S Shaft)MMCD 
E4.14-4.16 Signal Pole (Type L Shaft)MMCD 
SE4.172Signal Posts Type 4ACoK SupplementalMar 2014
SE4.181Signal Posts Type 4ACoK SupplementalJan 2011
E4.19-4.20 Post Top Luminaire PolesDelete 
E4.21 Service BaseMMCD 
E4.22 Pole AccessoriesMMCD 
E5.1 Post Top Signal Head MountingDelete 
E5.2 Side of Pole Signal Head Mounting (Method 1)MMCD 
E5.3-5.6 Various Signal Head Mounting MethodsDelete 
SE5.73Mid Span Overhead Signal Mounting (Plumbizer Method)CoK SupplementalMar 2012
SE5.80Overhead Signal Head Mounting (Plumbizer Method)CoK SupplementalFeb 2011
E5.9 Overhead Signal Head Mounting (Adjustable Bracket Method)Delete 
E5.10-5.11 Overhead Signal Head Mounting on Pole Arm (Ball Hanger Method)Delete 
E5.12 Audible SignalsDelete 
E5.13 Video Detection Installation Detail on Special 2A ArmMMCD 
SE5.14 Video Detection Installation Detail on Signal ArmCoK SupplementalFeb 2011
SE5.150Internally Illuminated Pedestrian Crosswalk SignCoK SupplementalJan 2011
E6.1 Pedestrian Pushbutton with Separate SignDelete 
SE6.21Pedestrian Pushbutton with Integral SignCoK SupplementalMar 2012
E6.3 Pedestrian Pushbutton PostMMCD 
E7.1 Underground Dip ServiceMMCD 
E7.2-7.3 Service Panel in Service Base (Mounting Details)MMCD Supplementary Update 
E7.4 60A Streetlight and 100A Streetlight/Traffic Signal S.P. (Panel Details)MMCD 
E7.5 40A (120/240V) Street Lighting S.P. (Wiring Diagram)MMCD Supplementary Update 
SE7.62100A or 60A (120/240V) Traffic Signal and/or Street Lighting S.P. (Wiring Diagram)CoK SupplementalMar 2014
E7.7 100A Traffic Signal/Streetlight Service Panel on Pole (Mounting Details)MMCD Supplementary Update 
E7.8 100A Traffic Signal/Streetlight Service Panel on Pole (Mounting Details)MMCD 
E7.9 100A (120/240V) Traffic Signal/Street Lighting S.P. (Wiring Diagram)MMCDPre-2007
E7.10 Service Ground Plate Installation DetailMMCD 
E7.11 Luminaire Wiring in Pole HandholeMMCD 
E7.12 Signal Cable Wiring in Pole HandholeMMCD 
SE7.132Traffic Signal Wiring Color CodeCoK SupplementalMar 2014
E7.14 Minimum Clearances to Overhead PowerlinesMMCD 
E7.15 Pole Mounted ReceptacleMMCD 
E7.16 Telephone Demarcation Enclosure Mounting DetailsMMCD 
E7.17 Telephone Conduit on Utility PoleMMCD 
E7.18 Conduit Tie-In to Telephone Vault, Manhole or Junction BoxMMCD 
E8.1 Typical Detector Loop TypesMMCD 
E8.2 Detector LoopsMMCD 
E8.3 Detector LoopsMMCD 
E8.4 Detector Loop to Shielded Cable SplicesMMCD 
E8.5 Detector Loop Procedures and RulesMMCD 
E8.6 Detector Loop Procedures and RulesMMCD 
SE8.72Typical 8 Phase SignalCoK SupplementalApr 2015
SE8.110Typical Two and Four Lane Counting Station Loops & Conduit LayoutAdditionalApr 2015
SE8.120Typical Traffic Counting StationAdditionalApr 2015
E8.8 Pre-Formed Diamond Detector Loop Installation DetailsDelete 
E8.9 Pre-Formed Diamond Detector Loop Installation DetailsDelete 
E8.10 Pre-Formed Diamond Detector Loop Installation DetailsDelete 
E9.1 Flasher Luminaire and Signs on Perforated Steel TubingDelete 
E9.2 Flasher Luminaire and Signs on Perforated Steel TubingDelete 
E9.3 Flasher Luminaire and Signs on Steel PoleDelete 
E9.4 Flasher Luminaire and Signs on Steel PoleDelete 
E10.1-10.2 Overhead Extruded Aluminum Advance Warning SignMMCD 
SE10.30Overhead Extruded Aluminum Advance Warning Sign Installation DetailsCoK SupplementalJan 2011
E10.4-10.8 Overhead Extruded Aluminum SignMMCD 
E10.9 Overhead Extruded Aluminum Sign LuminaireMMCD 
E10.10 Junction Box Installation Details on Sign ArmsMMCD 
General Details
G0 Drawing Index - General DetailsMMCD 
G1 General LegendMMCD 
G2 General Legend for Contract DrawingsMMCD 
SG31Legend for Streetlights and SignalsCoK SupplementalDec 2010
SG43Utility TrenchCoK SupplementalJan 2019
SG53Pavement RestorationCoK SupplementalJan 2019
G6 Concrete Encasement Watermain/Sewer SeparationMMCD 
G7 Concrete Protection Underground UtilitiesMMCD 
G8 Pipe Anchor BlocksMMCD 
SG92Utility Offsets for Urban R/WAdditionalJan 2019
SG102Utility Servicing in a Cul-De-SacAdditionalFeb 2019
SG112Service Locations Standards for S.F.D. Residential LotAdditionalJan 2019
SG126Project SignAdditionalJan 2019
SG13 Typical Traffic Sign InstallationAdditionalFeb 2021


R0 Drawing Index - RoadworksMMCD 
R1 Paved ShouldersMMCD 
Storm and Sanitary Sewers
S0 Drawing Index - Storm and Sanitary SewersMMCD 
SS10Standard ManholesCoK SupplementalFeb 2019
S2 Standard Manhole Connection DetailsMMCD 
S3 Manhole Connection Details - Drop and Ramp TypeDelete 
SS41Inside Drop ManholeCoK SupplementalJan 2019
S5 Precast Riser ManholeMMCD 
SS5a Cast in Place Manhole for 375-1200 SewersDelete 
S6 Sewer CleanoutDelete 
SS73Sanitary Sewer Service ConnectionCoK SupplementalJan 2019
SS84Storm Sewer Service ConnectionCoK SupplementalJan 2019
SS92Inspection Chamber for Sanitary & Sewer ConnectionsCoK SupplementalFeb 2019
S10 Inspection Chamber for 250-375mm San, Sewer Conn.Delete 
SS11a5Catch Basin - Type ICoK SupplementalJun 2019
SS11b4Catch Basin - Type IICoK SupplementalJun 2019
SS11c2Catch Basin - Type IIICoK SupplementalJun 2019
SS12a2Lawn DrainsCoK SupplementalJan 2019
SS12b0Drywell StructureCoK SupplementalJan 2019
SS133Concrete HeadwallCoK SupplementalJan 2019
SS143Headwall GrillageCoK SupplementalFeb 2019
SS15 Driveway Culvert With Concrete Sandbag HeadwallsDelete 
W0 Drawing Index - WaterworksMMCD 
SW10Typical Thrust Block ArrangementsCoK SupplementalFeb 2019
SW25Water Service Connection (25-50mm Dia)CoK SupplementalFeb 2019
W2a-W2d Water Service Connections and Water MetersDelete 
SW32Gate Valve InstallationCoK SupplementalJan 2019
SW45Fire Hydrant AssemblyCoK SupplementalFeb 2019
W5 Test Point InstallationMMCD 
SW6/SW73Air Release Valve ChamberCoK SupplementalJan 2019
SW86Self-Draining Standpipe (Buried) & Corrosion ProtectionCoK SupplementalMay 2019
W9 Blow-Down ChamberMMCD 
W10 Waterworks Chamber DrainMMCD 
SW113Butterfly Valve ChamberAdditionalJan 2019
SW12 Butterfly Valve Actuator ChamberDelete 
SW13 Watermain RelocationDelete 
SW140Median Irrigation DetailsAdditionalJuly 1997
SW151Water Service Corrosion ProtectionDelete 
SW163Typical Corrosion Protection Monitoring Test Station InstallationAdditionalMay 2019
SW17 Flush Mounted Monitoring Test StationDelete 
Cathodic Protection
W100 Drawing Index - Cathodic ProtectionMMCD 
SW1041Cathodic Protection Ground Level Test Station DetailsCoK SupplementalMay 2019
W105 Big Fink Test Station TerminalDelete 
W106 Joint Community BondDelete 
SW1071Structure Cable Bond DetailCoK SupplementalMay 2019
W108 Standard Test StationDelete 
W109 Isolation Test StationDelete 
W110 Standard Anode Station at Isolation Test PointDelete 
SW1111Standard Sacrificial Anode StationCoK SupplementalMay 2019
SW111a0Isolated Metal Fitting Cathodic Protection Installation Single Test Station with 2 CircuitsCoK SupplementalMay 2019
W112 Sacrificial Anode with Lateral or Service ConnectionDelete 
W113 Foreign Utility Test StationDelete 
W114 Impressed Current Catodic Protection Rectifier InstallationDelete 
W115 Horizontal Anode InstallationDelete 
W116 Semi-Deep Anode Well InstallationDelete 
SW1192Hydrant Cathodic ProtectionCoK SupplementalMay 2019